Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 4
43.23.13.02.12.01.11.0
Close
Search Search on Documentation

Plane - Power Plane Clearance

Created: March 17, 2022 | Updated: March 18, 2022 | Applies to version: 4

This document is no longer available beyond version 4. Information can now be found here: Power Plane Clearance Rule for version 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

Rule category: Plane

Rule classification: Unary

Summary

This rule specifies the radial clearance created around vias and pads that pass through but are not connected to a power plane.

In PCB design, this clearance is also referred to as an antipad (or anti-pad).
All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Defining, Scoping & Managing PCB Design Rules.

Constraints

Default constraints for the Power Plane Clearance Rule.Default constraints for the Power Plane Clearance Rule.

  • Clearance - the value for the radial clearance.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

During output generation.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content