Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 2.1
543.23.13.02.12.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... Dialog Reference M to R

Preferred Routing Width

Created: May 02, 2019 | Updated: March 06, 2024 | Applies to versions: 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5
Now reading version 2.1. For the latest, read: Preferred Routing Width for version 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Preferred Routing Width dialog

Summary Copy Link Copied

The Preferred Routing Width dialog is used to add or edit a routing width on the Favorite Interactive Routing Widths dialog.

Access Copy Link Copied

The dialog is accessed from the Favorite Interactive Routing Widths dialog by clicking the Add or Edit button or double-clicking on a width.

Options/Controls Copy Link Copied

  • Enter Preferred Width - enter the width desired in the textbox. If the Add button was clicked to access the dialog, the new width will be added to the Favorite Interactive Routing Widths dialog. If the Edit button was clicked to access the dialog, the width will update in the Favorite Interactive Routing Widths dialog.

 

English
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Printer-friendly version