Exporting a Design to PADS Logic
Altium NEXUS includes a software extension for exporting design project schematics to a PADS® Logic 5.0 format. The PADS Logic Exporter extension creates outputs compatible with PADS Logic 5.0 using a text file format, which should also be supported by future versions of PADS.
PADS Logic Exporter Extension
To use the exporter, first ensure the PADS Logic Exporter extension is included in the Software Extensions region, on the Installed tab of the Extensions & Updates view.
If the PADS Logic Exporter extension is not listed or is at anytime uninstalled, the extension will need to be installed. To do so, access the Extensions & Updates view, then open the Purchased tab where
the PADS Logic Exporter extension will be listed (the extensions are listed alphabetically). Click to download the extension, and then restart Altium NEXUS when prompted.
Using the Exporter
To use the export functionality:
- Make a schematic the active document.
- Choose the File » Export » PADS Logic 5.0 command from the main menus.
- Use the Export File dialog that appears to define where, and with what name, the exported PADS file is to be saved.
- Use the Export settings dialog to choose between exporting the whole project (all sheets) or just the selected (active) sheet.
- Another dialog will follow to confirm a successful export – the exported txt file is then available in the nominated save location.
Example export of an active schematic sheet to PADS Logic 5.0 format.
Export restrictions
- The extension does not support Harness export because PADS does not have a compatible entity.
- Multi-level hierarchies are not supported because PADS only allows one level.
- All exported Pins will have the same length regardless of source data. Pins have a parameterized length in Altium NEXUS, while PADS pins are standalone objects whose lengths are defined as graphics coordinates.
- As PADS does not support junction points over Buses, a T connection for two Buses is not compatible. Only single Nets are supported.
- Repeat modifiers in sheet Symbols are not supported because PADS does not have a compatible entity.
- Ports set directly to Buses are not compatible, however Ports set to corresponding Nets will be exported.