DisplayInteractivePropertiesPanel

Created: December 11, 2018 | Updated: December 11, 2018 | Applies to versions: 2.0, 2.1, 3.0, 3.1, 3.2 and 4

Now reading version 4. For the latest, read: DisplayInteractivePropertiesPanel for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: InteractiveProperties Commands

The following pre-packaged resource, derived from this base command, is available:

Toggle Properties Panel

Applied Parameters: Action=Toggle|SetFocus=True

Summary

This command is used to quickly toggle the display of the Properties panel.

Access

This command is accessed from the Schematic Editor, Schematic Library Editor, PCB Editor, PCB Library Editor, and Layer Stackup Editor by using the F11 keyboard shortcut.

Use

After launching the command, the Properties panel will either disappear or reappear, depending on whether it is currently visible or not.

Tips

If the panel is part of a group of panels, using this command will make it the active panel in the group - bringing it to the front in docked or floating modes, and popping it out in pop-out mode.
Using this command will toggle the display of the panel in the position and mode in which it was last placed.
A currently visible panel will have a 'tick' icon next to its menu entry.
The panel can also be toggled, with respect to its visibility, using the View » Panels » Properties command, or by clicking the button (available on the right of the Status Bar) and choosing the Properties menu entry.

Printer-friendly version

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

DisplayInteractivePropertiesPanel

Summary

Access

Use

Tips

Was this page helpful?