State Properties

Now reading version 1.1. For the latest, read: State Properties for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The State Properties dialog
The State Properties dialog

Summary

The State Properties dialog provides controls to edit the properties of a selected State in the Lifecycle Definition.

For more information about lifecycle definitions, click here.

Access

The dialog is accessed from the Edit Lifecycle Definitions dialog in the following ways: 

  • Right-click in State Before and Transitions region then select Add State.
  • Click  to edit the properties for an existing and released State.
  • Click the button under the State Before and Transitions region to establish properties for a new State.

Options/Controls

Properties

  • State Name - specify a name for the State.
  • Description - enter a description for the State.
  • Text Color - click the color box to open the Choose Color dialog then select the desired text color.
  • Background Color - click the color box to open Choose Color dialog then select the desired background color.

Text Color Preview

Displays a preview of the text color.

Background Color Preview

  • Displays a preview of the background color.
  • Visible in Vault panels - with this option enabled, a revision of an Item using the parent lifecycle definition will be displayed in the Explorer panel (and Libraries panel) when it is set to be in this lifecycle state. When this option is disabled, the revision will be hidden in both places. A hidden revision can, however, be displayed (overriding this option) by enabling the Show Hidden Revisions control in the Explorer panel.
  • Allowed to be used in designs - with this option enabled, an Item Revision in this state is permitted to be used in a design. It is deemed to be Applicable. If this option is disabled, an Item Revision in this state cannot be validly used and is deemed Inapplicable (or non-applicable). It will be flagged as such in the Properties panel in Component mode and the Item Manager dialog. The project compiler can also be configured to find such occurrences.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.