Choose Documents To Compare
This document is no longer available beyond version 21.0. Information can now be found here: Finding Differences for version 24
The Choose Documents To Compare dialog, shown in basic (left) and advanced (right) modes.
Summary
The Choose Documents To Compare dialog provides controls to choose which documents to compare when using the Comparator with any detected differences presented in the subsequent Differences between dialog. It is available in two modes - a basic mode that allows you to quickly select the target PCB document to compare against the project's source document hierarchy, and an advanced mode that gives control over the documents compared (document-to-document, project-to-project, or document-to-project).
Access
The dialog is accessed in the following ways:
- Right-clicking in the Projects panel then choosing the Show Differences command from the context menu.
- Click Project » Show Physical Differences from the main menus.
Options/Controls
- Documents list - this main region of the dialog lists the documents that can, and selectively are, to be compared. The appearance depends on the mode as determined by the Advanced Mode option:
- Basic Mode - a single list will present the PCB documents for the focused design project. Choose the specific PCB document to compare against the design hierarchy of that project.
- Advanced Mode - two lists are presented, each displaying the currently open projects and their documents. Choose a document on the left to compare with a document on the right. You can choose to compare a document with another document, a project with another project, or a document with a project (as per basic mode).
- Advanced - use this option to toggle the dialog between its basic mode (disabled) and its advanced mode (enabled).