Search In: Doc:Documentation: Altium Designer
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 22.0
22
Close
Search Search on Documentation
Documentation Altium Designer Documentation ... Dialog Reference A to F

Create Project (Based on Chosen Process)

Created: October 30, 2018 | Updated: September 12, 2022 | Applies to version: 22

This document is no longer available beyond version 22.0. Information can now be found here: Creating a New Process-based Workspace Project for version 25

 
The functionality described on this page is only available when using Altium Designer with active Altium Designer Enterprise Subscription and a connected Workspace.

The Create New Project dialogThe Create New Project dialog

Summary

This dialog, which actually is titled after the process name, is used to create a new Workspace project based on a chosen activated project creation process.

Access

The dialog is accessed by clicking File » New » Project in <Workspace> then selecting the desired command from the sub-menu.

This dialog is only accessible if you have utilized processes, which are created and managed through your connected Workspace's browser-based interface. Read more about Creating & Managing Processes (Altium 365 Workspace, Enterprise Server Workspace).

Options/Controls

General Tab

  • Project Name - enter a suitable name for the Workspace project.
The project name must start with and can contain lower or uppercase letters or 0-9. Underscores, dashes, and spaces are allowed but can only be used in the middle of the name (beginning and ending spaces will be ignored). You cannot use the following words: AUX, COM1-COM9, LPT1-LPT9, CON, NUL, or PRN. In addition, the name cannot contain the following characters: \ . / ? % * : | " < >.
  • Description - enter a meaningful description of the project.
  • PCB Project Type - use the drop-down to select a suitable project type.
  • Project Template - use the drop-down to select the desired template from a list of installed templates. Click  to open a version of the Explorer panel (titled Select Project Template) to select the desired template.
  • Start - when clicked, the project will be created in accordance with the underlying workflow process.

Advanced Tab

  • Location - use to specify the location where the project will be located. Click  to browse and select the desired location.
  • Create Project Folder - check to create a new project folder automatically.
  • Repository - use the drop-down to select the desired repository for the project.
  • Repository Folder - click  to open the Add to Version Control dialog in which you can specify the repository folder.
The folder name must start with and can contain lower or uppercase letters or 0-9 and underscores. dashes, and spaces are allowed but can only be used in the middle of the name (beginning and ending spaces will be ignored). You cannot use the following words: AUX, COM1-COM9, LPT1-LPT9, CON, NUL, or PRN.
  • Server Folder - use to specify the server folder. Click  to open the Choose Folder dialog in which you can choose the desired folder.
The server folder path can start with any symbol except space or slash and can contain any symbol except space at the end. Spaces are allowed in the middle of the server folder name.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Note

The features available depend on your Altium product access level. Compare features included in the various levels of Altium Designer Software Subscription and functionality delivered through applications provided by the Altium 365 platform.

If you don’t see a discussed feature in your software, contact Altium Sales to find out more.

Content