Part

Parent page: Schematic Objects

The Part represents the actual physical electronic component.

Summary

A part is an electrical design primitive. It is a schematic symbol that represents an electronic device, such as a resistor, a switch, an operational amplifier, a voltage regulator, etc. Parts are stored within components in schematic component libraries. Note that each component can contain one or more parts. Along with a symbolic representation of the component, the part also includes links to models, such as the PCB footprint, and also parameters that are used to document details such as component parameters and supplier information. How the model links and parameters are added to the part depends on the type of library storage being used.

Availability

Parts are available for placement in both the schematic and schematic library editors.

• In the schematic editor, click Place » Part.
• Right-click in the workspace then choose Place » Part from the context menu.
• From the Components panel, right-click Place <ComponentName>. 
• Dragging and dropping a component from the Components panel.
• Select the Place button in the Details pane of the Components Panel, or by use the Enter hotkey.
• From the SCH Library panel when in the schematic library editor, select a component, then click Place. 

Placement from the Components Panel

In the schematic editor, the part selection and placement process may be done from the Components panel.

• The panel displays the contents of the currently selected library. Use the drop-down next to the library name to choose another library.
• Use the mask field below the currently selected library field to filter the list and speed the searching process or scroll and select the required part.
• Click Place, double-click, or click and drag to place the selected component onto the active schematic sheet. While the part is floating on the cursor, it can be rotated (press Spacebar), mirrored along an axis (press X or Y), or edited (press Tab) before placement.
• The columns shown in the list of components in the currently selected library can be reorganized (click and drag) or reconfigured (right-click then choose Select Columns).

On the left, an iteration of the Components panel when signed into a managed content server. On the right, an iteration of the Components panel when not signed into a server.

Searching for a Component

The file-based (non-managed) library menu options provides you the ability to set preferences, perform searches, and migrate filed-based library content. To access these options, select the library menu  button at the top right of the Components panel.

Select the File-based Libraries Preferences command to open the Available File-based Libraries dialog, where you may view controls to add or remove libraries, install libraries, and specify library search paths.

The current listing of file-based library components may be filtered by entering a search phase in the Components panel Search field. To access more advanced search capabilities for component Libraries, select the File-based Libraries Search option from the panel’s  menu (top right), which opens the File-based Libraries Search dialog. The dialog offers flexible search options including query-based filter constraints, and the ability to search through all available file-based libraries or those within a specified path.

• The default search Scope is to search for Components in the Available File-based Libraries.
• Alternatively, the dialog also supports searching through Libraries on path stored in folders on a drive. To do this, enable the Libraries on path option then configure the Path options as required.
• The Filters use "AND" and, therefore, it is better to start with a simple filter and if there are many results, use the Refine last search mode to search within the results.
• Query search results are presented in the File-based Libraries Search dialog when selecting Helper.

Placing from the Schematic Library Editor

A part also can be placed directly from a library that is open in the schematic library editor from the SCH Library panel. Note that:

• Clicking the Place button in the panel will place the selected part (component) in the last active schematic sheet.
• While the part is floating on the cursor, it can be rotated (press Spacebar), mirrored along an axis (press X or Y), or edited (press Tab) before placement. The action can also be performed during dragging of the object. Rotation is in increments of 90°.
• If a part is placed directly from a library, that library does not need to be added in the Available File-based Libraries dialog first.

A Part can also be placed directly from an open Schematic Library using the SCH Library panel.

Graphical Editing

Graphical editing for a part is limited to moving, rotating and mirroring. When a part is selected in the workspace, a dashed selection box will appear around it. To graphically manipulate a selected component:

• Press Delete to remove the selected part from the design.
• Click and hold to move the selected part. The cursor will jump to the nearest electrical hotspot (the wiring end of the nearest pin).
• Press the Spacebar to rotate the arc counterclockwise or Shift+Spacebar for clockwise rotation. The action can also be performed during dragging of the object. Rotation is in increments of 90°.
• While a part is moving on the cursor, press the X or Y key to mirror it along that axis.

A selected Part

Working Between the Schematic Component and the PCB Component

The software includes tools to help work between the component on the schematic and that same component on the PCB. These tools include Cross Probing, Cross Selection, and Selecting the PCB Components from the schematic.

Cross Probe

As the name implies, Cross Probe allows you to click on a component in one editor and jump to that component in the other editor. To Cross Probe:

• Click Cross Probe located on the schematic or PCB editor menu on the Tools menu.
• When you click the component in the schematic editor, it will be centered and zoomed in the PCB editor. The zoom level is set on the System - Navigation page of the Preferences dialog.
• The default behavior is to remain in the same editor, ready to cross probe another component. To switch to the other editor as you Cross Probe, hold the Ctrl key. 

Cross Select Mode

Cross Select Mode selects the same component in the other editor. Note that it does not zoom and center. Cross Selection is either on or off. Click Tools » Cross Select Mode to toggle the mode on/off. Select multiple components by holding the Shift key as you click to select.​

Selecting the PCB Components

This feature allows you to select multiple schematic components in a specific order, then place those same components in the PCB editor in the same order. To use this feature:

• Select the components on the schematic one by one (hold Shift as you click to select multiple components).
• Switch to the PCB editor then press the I, C shortcut to launch the Reposition Selected Components command. The Reposition Selected Components command is also available on the right-click menu after pressing the I shortcut. 

Non-Graphical Editing

Via the Properties Panel

Properties page: Part Properties

This method of editing uses the associated Component dialog and the Properties panel mode to modify the properties of a part object.

 The Part dialog, on the left, and the Part mode of the Properties panel on the right

After placement, the Component dialog can be accessed by:

• Double-clicking on the placed component object.
• Placing the cursor over the component object, right-clicking then choosing Properties from the context menu.

During placement, the Component mode of the Properties panel can be accessed by pressing the Tab key. Once the component is placed, all options appear.

After placement, the Component mode of the Properties panel can be accessed in one of the following ways:

• If the Properties panel is already active, by selecting the component object.
• After selecting the arc object, select the Properties panel from the Panels button in the bottom right section of the workspace, or by selecting View » Panels » Properties from the main menu.

Editing Multiple Objects

The Properties panel supports multiple object editing, where the property settings that are identical in all currently selected objects may be modified. When multiples of the same object type are selected manually, via the Find Similar Objects dialog or through a Filter or List panel, a Properties panel field entry that is not shown as an asterisk (*) may be edited for all selected objects.

Via a List Panel

Panel pages: SCH List, SCHLIB List, SCH Filter, SCHLIB Filter

A List panel allows you to display design objects from one or more documents in tabular format enabling quick inspection and modification of object attributes. Used in conjunction with appropriate filtering - by using the applicable Filter panel, or the Find Similar Objects dialog - it enables the display of just those objects falling under the scope of the active filter – allowing you to target and edit multiple design objects with greater accuracy and efficiency.