ViaSize_BottomLayer

Now reading version 20. For the latest, read: ViaSize_BottomLayer for version 21

Parent page: PCB Query Functions - Fields

Summary

Returns via objects whose X Size (Bottom Layer) property complies with the Query.

Syntax

ViaSize_BottomLayer : Number

Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).

A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:

  • AsMils(ViaSize_BottomLayer) : Number – to specify a size in mil.
  • AsMM(ViaSize_BottomLayer) : Number – to specify a size in mm.

Example Usage

ViaSize_BottomLayer = 100
Returns all via objects whose X Size (Bottom Layer) property is equal to 100 current measurement units.

ViaSize_BottomLayer >= 4.064
Returns all via objects whose X Size (Bottom Layer) property is greater than, or equal to, 4.064 current measurement units.

AsMils(ViaSize_BottomLayer) > 80
Returns all via objects whose X Size (Bottom Layer) property is greater than 80mil.

AsMM(ViaSize_BottomLayer) Between 1.524 And 3.81
Returns all via objects whose X Size (Bottom Layer) property is greater than or equal to 1.524mm and less than or equal to 3.81mm.

ViaSize_BottomLayer <> 50
Returns all via objects whose X Size (Bottom Layer) property is not equal to 50 current measurement units.

Tips

  1. For simple vias (with Stack Mode set to Simple) the X Size (Bottom Layer) property will be the same as the X Size (All Layers) property, since the specified size is used for all signal layers.
  2. When viewing the properties for a selected via in the Properties panel, the X Size (Bottom Layer) property corresponds to the Diameter field for the Bottom Layer (in the Size and Shape section) when the mode is set to Top-Middle-Bottom, or Full Stack. When the mode is Simple, this will correspond to the Diameter field.
  3. The X Size (Bottom Layer) property is only defined for pad and via objects.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Note

The features available depend on your Altium product access level. Compare features included in the various levels of Altium Designer Software Subscription and functionality delivered through applications provided by the Altium 365 platform.

If you don’t see a discussed feature in your software, contact Altium Sales to find out more.