PadShape_BottomLayer

Parent page: PCB Query Functions - Fields

Summary

Returns pad objects whose Shape (Bottom Layer) property complies with the Query.

Syntax

PadShape_BottomLayer = PadShape_String
PadShape_BottomLayer <> PadShape_String

PadShape_String must be one of the following strings:

• 'Round'
• 'Rectangular'
• 'Octagonal'
• 'Rounded Rectangle'

Example Usage

PadShape_BottomLayer = 'Rectangular'
Returns all pad objects whose Shape (Bottom Layer) property is set to Rectangular.

PadShape_BottomLayer <> 'Octagonal'
Returns all objects except for pad objects whose Shape (Bottom Layer) property is set to Octagonal.

PadShape_BottomLayer = 'Round' || PadShape_BottomLayer = 'Rectangular'
Returns all pad objects whose Shape (Bottom Layer) property is set to either Round or Rectangular.

IsPad && PadShape_BottomLayer <> 'Octagonal'
Returns all objects except for pad objects whose Shape (Bottom Layer) property is set to Octagonal.

Tips

1. The single quote characters (') at the start and end of PadShape_String are mandatory.
2. For simple pads (with Stack Mode set to Simple) the Shape (Bottom Layer) property will be the same as the Shape (All Layers) property, since the specified shape is used for all signal layers.
3. The Shape (Bottom Layer) property is only defined for pad objects.