Altium Designer Documentation
...
Fields
M to R
Pad_CornerRadius_BottomLayer
Created: September 03, 2015 | Updated: August 11, 2021
| Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
Now reading version 19. For the latest, read: Pad_CornerRadius_BottomLayer for version 21
Parent page: PCB Query Functions - Fields
Summary
Returns pad objects whose Pad Corner Radius (%) (Bottom Layer) property complies with the Query.
Syntax
Pad_CornerRadius_BottomLayer = CornerRadius_String
Pad_CornerRadius_BottomLayer <> CornerRadius_String
CornerRadius_String specifies the corner radius, expressed as a percentage.
Example Usage
Pad_CornerRadius_BottomLayer = '50%'
Returns all pad objects whose Pad Corner Radius (%) (Bottom Layer) property equals 50%.
Pad_CornerRadius_BottomLayer <> '30%'
Returns all objects except for pad objects whose Pad Corner Radius (%) (Bottom Layer) property equals 30%.
Tips
- The single quote characters (') at the start and end of
CornerRadius_Stringare mandatory. - For simple pads (with Stack Mode set to Simple) the Pad Corner Radius (%) (Bottom Layer) property will be the same as the Pad Corner Radius (%) (All Layers) property, since the specified Corner Radius is used for all signal layers.
- The Pad Corner Radius (%) (Bottom Layer) property is only defined for pad objects.