Linear Diameter Dimension

Now reading version 17.0. For the latest, read: Linear Diameter Dimension for version 17.1
 

Parent page: PCB Objects

Placed Linear Diameter Dimensions.

Summary

A linear diameter dimension is a group design object. It allows for the dimensioning of an arc or circle with respect to the diameter, rather than the radius. The dimension can be placed either internally or externally.

Availability

Linear Diameter dimension objects are available for placement in the PCB Editor only. Use one of the following methods to access a placement command:

  • Choose Place » Dimension » Linear Diameter from the main menus.
  • Click the  button on the Place Dimension drop-down () of the Utilities toolbar.

Placement

After launching the command, the cursor will change to a cross-hair and you will enter dimension placement mode. Placement is made by performing the following sequence of actions:

  1. Position the cursor and click or press Enter to anchor the dimension to the desired arc or circle. The position of the dimension is determined by the alignment angle for the dimension.
  2. Move the dimension text to the desired position (either internal or external) and click or press Enter to complete placement.
  3. Continue placing further linear diameter dimensions, or right-click or press Esc to exit placement mode.

Additional actions that can be performed during placement are:

  • Press the + and - keys (on the numeric keypad) to cycle forward and backward through all visible layers in the design respectively – to change placement layer quickly.
  • Press Spacebar to rotate the dimension anti-clockwise or Shift+Spacebar for clockwise rotation. Rotation is in accordance with the value for the Rotation Step, defined on the PCB Editor – General page of the Preferences dialog.
  • Press the Tab key to access an associated properties dialog, from where properties for the dimension can be changed on-the-fly.

While attributes can be modified during placement (Tab to bring up associated properties dialog), bear in mind that these will become the default settings for further placement unless the Permanent option on the PCB Editor – Defaults page of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.

Graphical Editing

This method of editing allows you to select a placed linear diameter dimension object directly in the workspace and change properties such as the position of its text and its reference points, graphically.

When a linear diameter dimension object is selected, the following editing handles are available:

A selected Linear Diameter Dimension.

  • Click & drag A or B to adjust the dimension text position parallel to the extensions.
  • Click & drag C or D to detach the dimension from the reference object.

C & D allow for a redefinable reference – once the dimension is detached from a reference object it becomes non-referenced and can be moved for attachment to a different reference point or object.

If the linear diameter dimension object is totally non-referenced (i.e. it is not attached to a reference design object) click anywhere on it – away from editing handles – and drag to reposition it. While dragging, the linear diameter dimension can be rotated (Spacebar/Shift+Spacebar).

If attempting to graphically modify an object that has its Locked property enabled, a dialog will appear asking for confirmation to proceed with the edit. If the Protect Locked Objects option is enabled on the PCB Editor – General page of the Preferences dialog, and the Locked option for that design object is enabled as well, then that object cannot be selected or graphically edited. Double click on the locked object directly and disable the Locked property or disable the Protect Locked Objects option, to graphically edit the object.

Non-Graphical Editing...

The following methods of non-graphical editing are available:

via an Associated Properties Dialog

Dialog page: Linear Diameter Dimension

This method of editing uses the following dialog to modify the properties of a linear diameter dimension object.

The Linear Diameter Dimension dialog.

The Linear Diameter Dimension dialog can be accessed prior to entering placement mode, from the PCB Editor – Defaults page of the Preferences dialog. This allows the default properties for the linear diameter dimension object to be changed, which will be applied when placing subsequent linear diameter dimensions.

During placement, the dialog can be accessed by pressing the Tab key.

After placement, the dialog can be accessed in one of the following ways:

  • Double-clicking on a placed linear diameter dimension object.
  • Placing the cursor over a linear diameter dimension object, right-clicking and choosing Properties from the context menu.
  • Using the Edit » Change command and clicking once over a placed linear diameter dimension object.

Quickly change the units of measurement currently used in the dialog between metric (mm) and imperial (mil) using the Ctrl+Q shortcut. This affects the dialog only and does not change the actual measurement unit employed for the board, as determined by the Measurement Unit setting in the Board Options dialog (Design » Board Options).

Via the PCB Inspector Panel

Panel page: PCB Inspector, PCB Filter

The PCB Inspector panel enables the designer to interrogate and edit the properties of one or more design objects in the active document. Used in conjunction with appropriate filtering - by using the PCB Filter panel, or the Find Similar Objects dialog - the panel can be used to make changes to multiple objects of the same kind, from one convenient location.

Via the PCB List Panel

Panel page: PCB List, PCB Filter

The PCB List panel allows the designer to display design objects from one or more documents in tabular format, enabling quick inspection and modification of object attributes. Used in conjunction with appropriate filtering - by using the PCB Filter panel, or the Find Similar Objects dialog - it enables the display of just those objects falling under the scope of the active filter – allowing the designer to target and edit multiple design objects with greater accuracy and efficiency.

Tips

  1. A linear diameter dimension object can be moved in the following ways:
    1. Selecting both the dimension object and the object that is being dimensioned. The whole can be dragged to a new location as required.
    2. Selecting the object that is being dimensioned only. The dimension text will follow the object in its alignment plane only. The dimension extensions will expand/contract to keep the relationship between dimension and object being dimensioned.
    3. Selecting the dimension object only. It is important to note that the dimension cannot be moved on its own if it is referenced by a design object. To move the dimension only, it must first be detached from the object it is dimensioning.
  2. The dimension's value automatically updates as the diameter of the reference arc or circle changes.
  3. When the reference arc or circle to which a linear diameter dimension object is attached is deleted, a dialog will appear, asking whether the dimension should also be deleted. If the dimension is not deleted, it remains in the workspace, but non-referenced.
  4. Linear diameter dimensions are group objects consisting of text and track segments. They can be converted to their set of primitive objects by choosing Tools » Convert » Explode Dimension to Free Primitives from the main menus. Once exploded, a dimension object can no longer be manipulated as a group object.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Note

The features available depend on your Altium product access level. Compare features included in the various levels of Altium Designer Software Subscription and functionality delivered through applications provided by the Altium 365 platform.

If you don’t see a discussed feature in your software, contact Altium Sales to find out more.

Content