Jump To String

Created: July 28, 2015 | Updated: June 19, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1

Now reading version 17.1. For the latest, read: Jump To String for version 22

The Jump To String dialog.

Summary

This dialog allows the designer to quickly jump to a specific text string within the design workspace, by specifying the text.

If the target string is already displayed within the main design window, the cursor will simply jump to anchor point of the string - the point by which it is held during a move operation, or rotated around. If the string is out of view, the cursor will be positioned at the anchor point of the string, centered within the main design window (where possible).

Access

The dialog can be accessed from the PCB Editor only, by using the Edit » Jump » String command from the main menus.

You can also use the J, S keyboard sequence directly from within the focused workspace.

Options/Controls

String - use this field to specify the text string that you wish to jump to. The string must be entered in its entirety. Alternatively, enter ? and click OK. The Strings dialog will appear, listing all text strings found within the active board document (free and children of other group objects). Use this dialog to quickly locate the string that you wish to jump to.

Printer-friendly version

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Jump To String

Summary

Access

Options/Controls

Was this page helpful?