DisplayInteractivePropertiesPanel

Created: September 29, 2017 | Updated: September 29, 2017 | Applies to versions: 18.0 and 18.1

Now reading version 18.1. For the latest, read: DisplayInteractivePropertiesPanel for version 21

Note

The features available depend on your Altium product access level. Compare features included in the various levels of Altium Designer Software Subscription and functionality delivered through applications provided by the Altium 365 platform.

If you don’t see a discussed feature in your software, contact Altium Sales to find out more.

Parent page: InteractiveProperties Commands

The following pre-packaged resource, derived from this base command, is available:

Toggle Properties Panel

Copy Link Copied

Applied Parameters: Action=Toggle|SetFocus=True

Summary

This command is used to quickly toggle the display of the Properties panel.

Access

This command is accessed from the Schematic Editor, Schematic Library Editor, PCB Editor, and PCB Library Editor, by using the F11 keyboard shortcut.

Use

After launching the command, the Properties panel will either disappear or reappear, depending on whether it is currently visible or not.

Tips

If the panel is part of a group of panels, using this command will make it the active panel in the group - bringing it to the front in docked or floating modes, and popping it out in pop-out mode.
Using this command will toggle the display of the panel in the position and mode in which it was last placed.
A currently visible panel will have a 'tick' icon next to its menu entry.
The panel can also be toggled, with respect to its visibility, using the View » Panels » Properties command, or by clicking the button (available on the right of the Status Bar) and choosing the Properties menu entry.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Printer-friendly version

DisplayInteractivePropertiesPanel

Summary

Access

Use

Tips

Was this page helpful?