CAM Editor - Film Box
This document is no longer available beyond version 21. Information can now be found here: CAM Editor - Film Box Preferences for version 25
The features available depend on your Altium product access level. Compare features included in the various levels of Altium Designer Software Subscription and functionality delivered through applications provided by the Altium 365 platform.
If you don’t see a discussed feature in your software, contact Altium Sales to find out more.
The CAM Editor - Film Box page of the Preferences dialog
Summary Copy Link Copied
The CAM Editor – Drawing Modes page of the Preferences dialog provides controls for controlling your film box name, display, and dimensions.
Access Copy Link Copied
This page is part of the main Preferences dialog that is accessed by clicking the 
control in the upper-right corner of the design space then selecting the Film Box entry under the CAM Editor folder.
Options/Controls Copy Link Copied
Box Name
- Box Name - use this drop-down to select one of the following values from the box name. This field must contain a valid name (e.g. "box1").
Box Size (Inch)
- X - enter the desired X-axis box size in inches.
- Y - enter the desired Y-axis box size in inches.
Lower Left Corner (Inch)
- X - enter the desired X-axis lower-left corner size in inches.
- Y - enter the desired Y-axis lower-left corner size in inches.
Display
Display Box At Start Up - enable this option if you want the film box to appear when the CAM Editor starts up.