Altium Designer Documentation
...
Dialog Reference
A to F
Add to BOM Components
Created: September 04, 2017 | Updated: January 26, 2019
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
Now reading version 20. For the latest, read: Add to BOM Components for version 21
The Add to BOM Components dialog
Summary
The Add to BOM Components dialog is used to define the number of instances of a component in an ActiveBOM. Active BOM supports adding additional managed (server) and unmanaged (library) components into the BOM. This is a two-step process; first the component is added into the BOM then the number of instances is defined. The remainder of the new item's parameters are edited directly in the BOM Items grid.
Access
After adding a new server or Custom Item (by clicking the Add new button in the ActiveBOM document then selecting the item type to add), right-click on the new item then select the Add instances of [<ItemDetails>] command.
Options/Controls
- Designator prefix - enter the prefix to be used for the designator of the additional instance(s).
- Separator - if required, a designator separator can be defined to give results such as X-1, or X:1.
- Quantity - enter the number of components required. This value is used to define the designator range and will also appear in the ActiveBOM Quantity column.