Search In: Doc:Documentation:
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 1.0
5.04.14.02.01.11.0
Close
Search Search on Documentation

Maintenance

Created: March 28, 2019 | Updated: May 13, 2020 | Applies to version: 1.0
Now reading version 1.0. For the latest, read: Maintenance for version 5.0

This documentation page references Altium Concord Pro, which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Health Monitor

An Altium Concord Pro installation includes a comprehensive Altium Concord Pro Health Monitor tool that allows Administrators to quickly ascertain and analyze the condition, or ‘health’ of a local Concord Pro server. Provided as a stand-alone, independent application, the Health Monitor delivers a visual summary of the state of the host machine, the Concord Pro storage system and Concord Pro's Services.

The tool also includes context related hints, information and paths to important locations and log files, which allows Concord Pro Administrators to preemptively detect and resolve any issues that may affect Concord Pro users. Since it operates as an independent entity that queries Concord Pro and its host system, the Health Monitor will deliver crucial data and information even in the unlikely event that Concord Pro is not fully functioning.

The Health Monitor presents Concord Pro status information via a simple GUI, and in general terms, covers the following critical areas:

  • Concord Pro Environment – the state of the hosts PC’s hardware, such as its hard disks, memory, CPU and the adequacy of its performance.
  • Concord Pro Server Backend – the state of the server’s supporting database, file storage and repository.
  • Concord Pro Services – the state the server’s range of services, hosted as IIS Application Pools, such as the Identity, Authorization and License Manager services.
The Health Monitor can be launched - on the computer hosting Concord Pro - using the desktop shortcut that is created when Concord Pro is installed. Alternatively, the Health Monitor tool can be found in the \Program Files (x86)\Altium\Altium Concord Pro\Tools\HealthMonitor folder as the avhealth.exe executable. Note that the folder also includes a simplified command-line tool: avConsoleHealth.exe.
Read about Health Monitor.

Backup and Recovery

Over time, your Altium Concord Pro instance will accommodate a growing, and impressive amount of data. The value of this data cannot be overstated, for it is a mixture of source data that can be re-used in future design projects, as well as data from which past, current, and future products are fabricated and assembled. It is data that has been released and ratified under the highest scrutiny, and stored securely with the utmost integrity. And as with all valuable data, longevity of its integrity is ensured by being able to perform a backup.

The Altium Concord Pro installation caters for the archival of your Server data through the provision of a command-line-driven Backup & Restore tool. The tool's executable - avbackup.exe - is located in the \Program Files (x86)\Altium\Altium Concord Pro\Tools\BackupTool folder, for a default installation of Altium Concord Pro.

Restoring a backup is only possible to the same version of server from which that backup was made. In this respect, it can be a good idea to keep the installer for that server, and corresponding license files, with the backup Zip archive.
Read about Backing up and Restoring Your Installation.

Proxy Server Support

For a company that accesses the internet through a proxy server, proxy configuration information can be defined for Altium Concord Pro - post installation. This enables Concord Pro Services to successfully connect with internet-based services through the company's proxy server, as and when required.

Proxy configuration information is entered into the [Proxy] section of the LocalVault.ini file. For a default installation of Altium Concord Pro, this file can be found in the following location: \Program Files (x86)\Altium\Altium Concord Pro.

Proxy server information is defined in the INI file after Altium Concord Pro has been installed. IIS (Altium Concord Pro-related application pools) should not be stopped before editing the file, but must be restarted after changes have been made and the INI file saved, in order for the changes to be applied.
While accessing the internet through secured protocol (HTTPS) is supported by a Proxy Server itself, use of a Proxy Server with HTTPS schema through the Altium Concord Pro installation is not supported. For example, if you want to acquire some components from the Altium Content Vault - connected through HTTPS - all will work fine. But if you want to specify a Proxy Server through Altium Concord Pro in the format https://myproxy:3128, this proxy will not work.
Read about Support for the use of a Proxy Server.

Command Line Server Management Tool

Altium Concord Pro provides a Command Line tool to cater for the following aspects of configuration:

  • User Management - allowing Altium Concord Pro to be preloaded with bulk user and role configurations derived from company systems or records, thereby avoiding a need to individually create the entries through Concord Pro's browser interface. The tool supports the import of Users, Roles, and user-role membership data from standard comma-delimited *.csv files.
  • Part Choice Indexing - allowing you to manually perform a re-indexing of the Part Choices for your managed components, sourced through user-defined Part Sources (connections to local parts databases).

The tool - avconfiguration.exe - is included with your Altium Concord Pro installation and can be found in the \Program Files (x86)\Altium\Altium Concord Pro\Tools\VaultConfigurationTool folder.

Even though the tool can be used for automated user management, the recommended approach is to use LDAP synchronization functionality.
Part choice re-indexing can be setup to occur automatically. Configure this using the Indexing part choices every field, when defining a custom database part source. Part sources are defined by an Altium Concord Pro administrator on the Part Providers page (Admin - Part Providers) of Concord Pro's browser interface. For more information, see Configuring a Custom Database Part Source.
Read about Command Line Tool for Server Management.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.