Home Tab

 

The following regions are specific to a PCB document (and a PCB library document as noted) on the Home tab.

Routing Copy Link Copied

The Routing region includes commands related to routing the PCB, for example, Route and Connections

Place Copy Link Copied

The Place region includes commands to place PCB and PCB library-specific objects, such as pads, vias, fills, and keepouts.

Dimension Copy Link Copied

The Dimension region includes commands to place dimensions on the PCB and PCB library. 

Pour Copy Link Copied

The Pour region includes commands related to polygon pours.

Design Rules Copy Link Copied

The Design Rules region includes commands related to design rules, for example, to run a DRC, access the PCB Rules And Violations panel, and open the PCB Rules and Constraints Editor dialog. 

Board Copy Link Copied

PCB Editor

The Board region includes commands to configure the board shape, open the Layer Stack Manager, place a drill table, and open the Board mode of the Inspector panel, among others.   

PCB Library Editor

The Options command of the Board region opens the Library Options mode of the Inspector panel.

Grids and Units Copy Link Copied

The Grids and Units region includes commands for configuring the snap grid and measurement units of the PCB and PCB library.

PCB editor
PCB editor

PCB Library editor
PCB Library editor

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.