Search In: Doc:Documentation: Altium CircuitStudio
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Close
Suche Search on Documentation
Documentation CircuitStudio Documentation ... Sch Dialogs

Harness Connector

Created: Dezember 16, 2024 | Updated: August 15, 2018
Other Related Resources
Harness Connector (Object)
Signal Harness (Object)
Harness Entry(Object)

Parent page: Sch Dialogs

The Harness Connector dialog

Summary

This dialog provides controls to specify the properties of a Harness Connector object. A Harness Connector object is an electrical drawing primitive that is essentially a container to group various signals together to form a Signal Harness including buses, wires, and other signal harnesses. A Harness Connector is defined by the Harness Type.

For information on how a placed harness connector object can be modified graphically directly in the workspace, see Graphical Editing.

Access

The Harness Connector dialog can be accessed during placement by pressing the Tab key.

After placement, the dialog can be accessed in one of the following ways:

  • Double-click on the placed harness connector object.
  • Place the cursor over the harness connector object, right-click then choose Properties from the context menu.

Properties Tab

Harness Connector dialog - Properties tab

Use the dialog's Properties tab to modify graphical properties of the harness connector object.

Options/Controls

  • Location - the current X (horizontal) and Y (vertical) coordinates for the top-left corner of the harness connector (X is the top value, Y is the bottom value). Edit these values to change the position of the harness connector in the horizontal and/or vertical planes respectively.
  • X-Size - the current length of the harness connector in the horizontal plane.
  • Y-Size - the current length of the harness connector in the vertical plane.
  • Primary Position - the current position of the tip of the connector's curly brace in relation to the top of the connector. Increasing this value will move the tip further downward.
  • Border Color - click the color sample to change the border color for the harness connector using the standard Choose Color dialog.
  • Fill Color - click the color sample to change the fill color for the harness connector using the standard Choose Color dialog.
  • Border Width - the width of the border used to draw the connector's curly brace. Available widths are: Smallest, Small, Medium, and Large.

Properties

  • Harness Type - use this field to identify the harness connector. This name is used for connectivity purposes when building a signal harness system involving this connector.
  • Hide Harness Type - enable this option to hide the Harness Type text string in the workspace.
  • Locked - enable this option to protect the harness connector from being edited graphically.
An object that has its Locked property enabled cannot be selected or graphically edited. Double-click on the locked object directly then disable the Locked property to graphically edit the object.

Harness Entries Tab

Harness Connector dialog - Harness Entries tab

Use the dialog's Harness Entries tab to manage the connector's associated harness entries.

Options/Controls

  • Harness Entries Grid - the main region of the tab lists all of the harness entries currently defined for the harness connector in terms of:
    • Entry - the name of the harness entry. Change the name as required by clicking on the field to focus.
    • Harness Type - the Harness Type for the harness entry (where specified). This will typically be blank when a wire or bus is connected to the harness entry and is used only when another signal harness itself is connected. A Harness Type can be directly entered. Alternatively, the associated drop-down lists all currently defined Harness Types detected across the source schematic documents of the active project.
When a harness entry is physically connected to another signal harness (facilitating nested signal harnesses), it will automatically inherit that harness's type. This type cannot be changed within the Harness Entries Grid.
  • Remove - click this button to delete the selected harness entry(ies) from the list.
Standard multi-select techniques are supported (Ctrl+click, Shift+click, click&drag).
  • Add - click this button to add a new harness entry to the connector. The new entry will be added at the bottom of the list and be given the default name 0. The Harness Type entry will be left blank.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content