Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 2.1
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((M to R))_AD

WorkspaceManager_Dlg-WMPCBVideoPropertiesFormPCB 3D Video_AD

Created: Oktober 30, 2018 | Updated: September 03, 2019 | Applies to versions: 2.0 and 2.1

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The PCB 3D Video dialogThe PCB 3D Video dialog

Summary

The PCB 3D Video dialog allows you to choose the PCB 3D video to be rendered, which allows information from the data source to produce and display an image.

Access

The dialog can be accessed in the following ways:

  • From the Project Options - Default Prints dialog  with PCB 3D Video selected under Documentation Outputs, click Configure. 

  • From the Documentation Outputs section of the Output Job file by right-clicking on the PCB 3D Video output and selecting Configure from the context menu. 
For more information about adding and defining an Output job, see the Preparing Multiple Outputs in an OutputJob page.  

Options/Controls

3D Video Render Options

  •  -  click this button to toggle the display of a shadow effect for the board.
  •  -  click this button to access an instance of the View Configurations - Physical Material Tab to configure how the board is rendered in 3D mode.
If the Project Options - Default Prints dialog was accessed when an OutJob file was the active document, this button is non-functional.
Note that the View Options tab of the View Configuration panel in 3D mode also provides the user with options to control the presentation of the board. 
  • Selected 3D Video to Render - use the drop-down to select a 3D video to render (i.e. generate a full-motion video playback). 
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.