Validating Component Status in Altium NEXUS

Now reading version 1.0. For the latest, read: Validating Component Status in Altium NEXUS for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Working with the Project Releaser

Managed components offer the designer a formal collection of high-quality, high-integrity, design building-blocks. Revision-controlled and lifecycle-managed, a company can authorize the 'set' of components that can be formally used by their designers, in each new design project embarked upon within that company. However, while Component Items may be authorized for design reuse, there also needs to be automated checking at the release validation stage, to verify that they are indeed in the right state to be used.

Altium NEXUS, in conjunction with your managed content server, provides an elegant solution to this, in the form of Component State Checking. A validation-based outputter is available for addition to an Output Job file - Components states. This can be configured to check for components that are in restricted states. As part of configuration, you determine the action to be taken for each currently defined state, of each currently defined Lifecycle Definition in the Server - no action, a warning, or generate an error. The latter will prevent release of the design. In addition, running the check will generate a handy HTML-based report, allowing you to see at-a-glance which design components are not in valid states.

Issues with using design items in restricted states can also be detected much earlier in the design cycle, by the Compiler. This concerns an Item Revision's applicability based on its current state, and whether it is allowed to be used in designs while in that state. This is controlled through use of a dedicated attribute at the individual state level. A project compiler violation can be configured to detect and flag any Server items being used in a design, whose revisions are in non-applicable states - catching and averting issues prior to release. For more detail, see Controlling Item Revision Visibility and Applicability.
When using an Altium NEXUS Server as your managed content server and enforcing the working environments of your designers through the use of Environment Configurations, you can ensure the use of the Output Job file in which component state checking has been defined. To do so, make sure the Output Job file permitted for use through the applicable environment configuration is marked as required - by enabling its Req'd attribute. If an OutJob defined as part of an environment configuration is marked as required, then release will not be possible until that OutJob is present and enabled for inclusion in the relevant data set being generated as part of project release. For more information, see Managing Environment Configurations.

Add an output generator of this type from the Validation Outputs section of the OutJob file. Configuration is performed in the Server Objects State Validation dialog.

Add and configure a component state check as part of your overall validation regime during board design release.Add and configure a component state check as part of your overall validation regime during board design release.

The dialog presents all lifecycle definitions defined for the managed content server to which you are actively signed in. For each definition, each uniquely-defined state is listed, along with its description. For each state associated with a lifecycle definition you employ for components in your designs, simply specify the checking action to be taken. Click within a state's Check Action field, and select the required action from the associated drop-down menu. Available checking options are None, Warning, and Error.

Click the Update from server button to refresh the dialog with the latest lifecycle definition information, directly from the Server.

Revisions of Component Items used in the design that are in a restricted state (one whose Check Action has been set to Error) will prevent the release of the board from happening. The generated report file will list all warnings and errors.

Example board release failing at the validation stage while checking component states. Hover over the image to see the generated report.
Here, the design is found to contain a single component revision in a restricted lifecycle state, and the release process is terminated in failure.

Ensure the component state check is added to the source Output Job file and configured BEFORE releasing that OutJob to the managed content server. Once managed, the OutJob file - specifically the configuration of an output generator - can not be changed. You would need to make changes and re-release into the next planned revision of the target Item. For more information, see Managed Output Job Files.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.