UnifiedComponent_Cmd-Cut ComponentCut Component_AD

Created: April 10, 2019 | Updated: April 10, 2019 | Applies to versions: 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

Now reading version 3.1. For the latest, read: UnifiedComponent_Cmd-Cut Component((Cut Component))_AD for version 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: UnifiedComponent Commands

The following pre-packaged resource, derived from this base command, is available:

Cut Component

Applied Parameters: None

Summary

This command is used to cut the selected component definition(s) from the active Component Library document and add them to the clipboard.

Access

With the required component definition(s) selected, this command can be accessed from the Component Library Editor when configured in Batch Editor mode by:

Choosing the Edit » Cut Component command from the main menus.
Right-clicking over a component definition in the selection, and choosing the Cut Component command from the context menu.
Using the Shift+Ctrl+X keyboard shortcut.

If the Component Library Editor is currently in Single Component Editor mode, switch to the Batch Editor mode using the Tools » Switch to Batch Editor command.

Use

First, select the component definition(s) you want to cut. After launching the command, the selection will be removed from the main grid region of the document and copied to the clipboard.

Druckversion

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

UnifiedComponent_Cmd-Cut ComponentCut Component_AD

Nexus message

Summary

Access

Use

Was this page helpful?