Sch_Dlg-LibraryRuleCheckDialogLibrary Component Rule Check_AD

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 


The Library Component Rule Check dialog

Summary

The Library Component Rule Check dialog provides controls to run a component rule check in the schematic library editor that generates a text report for specified settings.

Access

From the schematic library editor, click Reports » Component Rule Check from the main menus.

Options/Controls

Duplicate

  • Component Names - enable this option to check for duplicated component names.
  • Pins - enable this option to check for duplicated pins.

Missing

  • Description - enable this option to check for missing descriptions.
  • Footprint - enable this option to check for missing footprint names.
  • Default Designator - enable this option to check for missing default designators.
  • Pin Name - enable this option to check for missing pin names.
  • Pin Number - enable this option to check for missing pin numbers.
  • Missing Pins In Sequence - enable this option to check for missing pins in a sequence.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content