Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 3.2
43.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... PCB Query((Fields))_AD PCB Query Fields((M to R))_AD

Query_Lang-PCBFunctions_Fields_RadialDimensionAngularStepRadialDimensionAngularStep_AD

Created: September 09, 2015 | Updated: August 18, 2021 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Fields

Summary

Returns all radial diameter dimension, and radial dimension objects whose Angular Step property complies with the Query.

Syntax

RadialDimensionAngularStep : Number

The number returned specifies the Angular Step in units of degrees.

Example Usage

RadialDimensionAngularStep = 30.0
Returns all radial diameter dimension, and radial dimension objects that have a Angular Step property which is 30.0 degrees.

RadialDimensionAngularStep > 60.0
Returns all radial diameter dimension, and radial dimension objects that have a Angular Step property which is greater than 60.0 degrees.

RadialDimensionAngularStep Between 30.0 And 150.0
Returns all radial diameter dimension, and radial dimension objects that have a Angular Step property which is greater than, or equal to, 30.0 degrees and less than, or equal to, 150.0 degrees.

RadialDimensionAngularStep <= 45.0
Returns all radial diameter dimension, and radial dimension objects that have a Angular Step property which is less than, or equal to, 45.0 degrees.

Tips

  1. The Angular Step property is only defined for radial diameter dimension, and radial dimension objects.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.