Query_Lang-PCBFunctions_Fields_PadShape_TopLayerPadShape_TopLayer_AD

Created: September 03, 2015 | Updated: August 18, 2021 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2

Now reading version 1.1. For the latest, read: Query_Lang-PCBFunctions_Fields_PadShape_TopLayer((PadShape_TopLayer))_AD for version 4

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Fields

Summary

Returns pad objects whose Shape (Top Layer) property complies with the Query.

Syntax

PadShape_TopLayer = PadShape_String PadShape_TopLayer <> PadShape_String

PadShape_String must be one of the following strings:

'Round'
'Rectangular'
'Octagonal'
'Rounded Rectangle'

Example Usage

PadShape_TopLayer = 'Rectangular'
Returns all pad objects whose Shape (Top Layer) property is set to Rectangular.

PadShape_TopLayer <> 'Octagonal'
Returns all objects except for pad objects whose Shape (Top Layer) property is set to Octagonal.

PadShape_TopLayer = 'Round' || PadShape_TopLayer = 'Rectangular'
Returns all pad objects whose Shape (Top Layer) property is set to either Round or Rectangular.

IsPad && PadShape_TopLayer <> 'Octagonal'
Returns all objects except for pad objects whose Shape (Top Layer) property is set to Octagonal.

Tips

The single quote characters (') at the start and end of PadShape_String are mandatory.
For simple pads (with Stack Mode set to Simple) the Shape (Top Layer) property will be the same as the Shape (All Layers) property, since the specified shape is used for all signal layers.
The Shape (Top Layer) property is only defined for pad objects.

Druckversion

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.