Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 4
43.23.13.02.12.01.11.0
Close
Suche Search on Documentation

Project Compiler Violations Reference_AD

Created: August 03, 2021 | Updated: August 03, 2021 | Applies to version: 4

This document is no longer available beyond version 4. Information can now be found here: Verifying Your Design Project for version 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

When you connect two pins with a wire, you are drafting your design intentions, not creating an actual net. The net is not created until the project is compiled. As well as extracting details about the components and how they are connected, compiling also extracts detailed component and design parametric information. The compiled model of the project is referred to as the Unified Data Model.

In versions of the software prior to Altium NEXUS 20.0, the project had to be manually compiled to build the Unified Data Model. Since then, the design data model is incrementally updated after each user operation through dynamic compilation - creating what is referred to as the Dynamic Data Model (DDM). There is no manual compilation of the project involved, it is all done automatically.

The process of validating is integral to producing a valid netlist for a project. Connectivity awareness in your schematic diagram can be verified during compilation according to rules defined as part of the options for the design project - on the Error Reporting and Connection Matrix tabs respectively.

Validation of a project is performed using the Validate Project command - available for the active project from the main Project menu, or from the right-click context menu for a project from the Projects panel.

This area of the Altium NEXUS documentation provides a comprehensive reference describing each of the possible electrical and drafting violations that can exist in source documents when validating a project.

For a detailed overview of verifying your captured design, see Compiling and Verifying the Design.

Violations are grouped into the following categories:

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.