Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 4
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((M to R))_AD

PCB_Dlg-MoveRoom_AskUserDlgRoom containing No Net - Locked Objects_AD

Created: Februar 28, 2018 | Updated: März 01, 2018 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2 and 4

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Room containing No Net / Locked Objects dialog
The Room containing No Net / Locked Objects dialog

Summary

The Room containing No Net / Locked Objects dialog allows you to confirm which objects attached to a room to move when moving a room.

Access

This dialog can be accessed in the following ways:

  • From the main menus, select Design » Rooms » Move Room then click on a room.
  • Right-click on a room in the workspace then select Room Actions » Move Room from the context menu.
For this dialog to appear, the Ask when moving rooms containing No Net/Locked Objects option must be enabled on the PCB Editor - General page of the Preferences dialog.

Options/Controls

  • No Net Objects - enable to move objects with no nets with the room.
  • Locked Objects - enable to move locked objects with the room.
  • Don't ask me about moving room's locked/no net objects until next PCB session (use currently selected settings) - enable this option to save the selected settings and continue using them for the rest of your PCB session. The dialog will not open again unless a new session is started.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.