Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 3.2
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((G to L))_AD

PCB_Dlg-EditLineConstraintsLine Constraints_AD

Created: Mai 16, 2019 | Updated: Januar 08, 2020 | Applies to versions: 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5
Now reading version 3.2. For the latest, read: PCB_Dlg-EditLineConstraints((Line Constraints))_AD for version 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Line Constraints dialog

The Line Constraints dialog.

Summary

This dialog allows the designer to change the width of the line currently being placed, and/or the current layer for placement.

Access

From the PCB Editor and PCB Library Editor, the dialog can be accessed by pressing the Tab key while placing a Slice Polygon Pour. 

Options/Controls

  • Line Width - use this field to enter a new width for the line. This new width will be applied to the segment currently being placed.
  • Current Layer - use this field to switch the layer on which the line is placed. The drop-down menu lists all currently defined (and enabled) layers for the board. The chosen layer will apply to the look-ahead segment of line, that is, the segment after the one currently being placed.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.