ActiveBOM Enhancements (New Feature Summary)

Summary of New Features

• Manufacturer-centric Part Linking and Searching - whether you're adding a new manufacturer link for an unmanaged part; or editing the Part Choices for a managed part; or performing a search for a part; are all performed in new, manufacturer-centric part searching dialogs and panels. Learn more about defining Manufacturer Links for unmanaged components in ActiveBOM below.
• Ranking the Part Choices - ActiveBOM supports user-defined and auto MPN ranking in the BOM Items list, making it easy for the designer to control the order of the solutions for each part. Ranking can now be applied to Part Choices, in the new Edit Part Choices dialog. Rankings imported from an existing BomDoc now supports rankings applied to managed components, manufacturer links and  manual solutions.
• Replace a component in ActiveBOM, then update the project via an ECO - now you can change a component in the BomDoc and push this change back to the schematic project via an Engineering Change Order. Learn more about the new Change command below.
• BOM Checks from the OutputJob - ActiveBOM performs real-time checks on every item listed in the BOM. The required BOM Checks are configured in the BomDoc Properties panel, much like DRC is configured for the PCB. BOM Checks can now be included as a Validation Output check in an OutputJob, generating an HTML report with clickable links back to the BomDoc.
• ActiveBOM is tightly coupled to the new BOM Report Manager:
  • The new Report Manager interface is very similar to the ActiveBOM interface, making it easy to configure as required.
  • The new Report Manager supports BOM Sets defined in the BomDoc, making it easy to switch from one BOM layout to another.
  • The new Report Manager supports Excel-independent BOM Report generation.

Manufacturer-centric Solutions for both Managed and Unmanaged Components

ActiveBOM is used to manage the mapping from the design component (part), to the part that is purchased. For each part used in the project, the linkage between the design component, the manufacturer of the part to be fitted to the board, and the available suppliers of that part, is presented as a Solution in the lower region of the ActiveBOM interface. This Solution information can be transferred into the BOM, to purchase the components.

In a managed component each Part Choice becomes a Solution - coupling the design component to the manufacturer part, and the available suppliers.

Solutions for Managed Components

For a managed component (a component placed from a managed content server), the linkage between the design component and the real-world part is defined as a Part Choice. The advantage of using a Part Choice to couple the design component to the manufacturer part is that it means the design component does not need to have manufacturer or supplier details embedded in its parameters. Instead the manufacturer details are defined in the Part Choice, which can be updated as needed, and multiple Part Choices can be defined when required.

In ActiveBOM, each Part Choice presents as a unique Solution. As well as detecting existing Part Choices in the managed components, new Part Choices can be added and Part Choices can be ranked, from within ActiveBOM. Added Part Choices and rankings are automatically saved back in the managed content server.

Part Choices can be added and ranked in ActiveBOM, hover the cursor over the image to show more.

New Solution for Unmanaged Components

ActiveBOM also supports creating Solutions for unmanaged components, that is, components placed from a company library. Since unmanaged components do not support Part Choices, ActiveBOM offers other mechanisms to connect them to the supply chain.

1. Firstly, ActiveBOM can be configured to detect manufacturer part details embedded in the component parameters, and create a Solution using that information. Click the Manufacturer Links button in the ActiveBOM Properties panel to configure this.
2. ActiveBOM also supports Supplier Links, a feature where supplier details are added to the schematic component. ActiveBOM creates a Solution for each manufacturer part it can identify from the specified supplier(s). The downside to supplier links is that the supply chain is limited to the specified supplier.
3. The third level of support for an unmanaged component is to add a Solution directly in ActiveBOM. In previous versions of ActiveBOM, Solutions for unmanaged components were added as Supplier Links, limiting the supply chain data to the specified supplier. In this release, when a Solution is added to an unmanaged component in ActiveBOM, it is now added as a Manufacturer link. This gives the Solution full supply chain support, just like a Part Choice defined for a managed component.
4. ActiveBOM also supports adding BOM Items directly in the BomDoc. This feature is ideal for items that you do not want on the schematic, such as a label, a screw, or a tube of glue. These are included as a Manual Solution.

Manufacturer Links defined in ActiveBOM give full access to the supply chain.

Adding a New Solution

With this release of Altium NEXUS, adding and editing Solutions uses essentially the same process for both managed and unmanaged components. Regardless of whether you are adding a Manufacturer Link to add a solution to an unmanaged component, or a new Part Choice to add a solution to a managed component, you search for the part in the new Add Part Choices dialog.

To add a new solution, click the Add Solution button below the BOM Items list in ActiveBOM, and select either Add/Edit Manufacturer Link or Add/Edit PCL (Part Choice).

If you are adding a Manufacturer Link, the Edit Manufacturer Links dialog will appear. This dialog is used to add multiple Manufacturer Links, or to edit existing Links. To add a new link, click the Add button. The Add Part Choices dialog will open.

Utilizing Altium NEXUS's advanced component search engine, the Add Part Choices dialog can be used in a straightforward search mode by entering a query in the main Search field, or in its advanced faceted mode by progressively refining the search criteria using the Categories and Filters choices – or by using both capabilities together.

Use the Search field at the top of the dialog to locate suitable parts based on a search description.

For example: LED green clear 0603 SMD

Or use the Categories and Filters when you want to explore potential parts by toggling criteria on and off.

For example:

1. First select a Category, such as LEDs,
2. then Filter the LEDs category by the Manufacturer, Mount, Case/Package, and so on.

• Categories are accessed using the dropdown, as shown in the image above.
• Filters are accessed by clicking the button to display the dialog's Filters list. The contents of the Filters list changes to suit the category of component being searched. Hover the cursor over the image above remove the Categories list and show the Filters list.
• Click on a column heading to sort the results by that column.
• Some of the Filter fields include text boxes to enter numeric values, press Enter on the keyboard to apply the value.
• If the results list does not update, click in the Search field and press Enter on the keyboard.
• The current search criteria defined by the chosen Category and enabled Filters list are detailed just below the search bar, click the small x icon to remove any of the existing search criterion.
  
• Hover the cursor over the vertical colored bar to display the current manufacturer's Lifecycle status; for example, Volume Production, EOL, etc.
  ► Learn more about Interpreting the Lifecycle State.

Checking Supplier Data

Each manufacturer part that is returned in the search results includes 2 hyperlinks next to the image of the part.

Clicking:

• The upper link opens detailed component information about that part on the Octopart website.
• The lower link opens detailed information about suppliers that carry that part, ordered by availability and price.

Click the link to reveal detailed SPN information, sorted by availability and price.

The SPN tile includes detailed information about the part and its availability.

Change a Component in ActiveBOM and Update the Schematic

It's not uncommon to identify issues with components when the BomDoc is being checked and made ready for ordering the parts. For example, the designer may have forgotten to finalize the selection of a component, or a component has gone EOL and the designer wants to explore the price and availability of potential replacements. Previously the only way to resolve this was to return to the schematic and edit the component, select a suitable part, then refresh the BomDoc.

This release sees the addition of support for changing a component in the BomDoc, and then pushing that change back to the schematic via an Engineering Change Order. Right-click on the selected component(s) and select the Change <ComponentName> command. The Change Component dialog will open, where the replacement component can be searched for.

When the Component Search OK button is clicked the Engineering Change Order dialog will open, detailing the changes needed to synchronize the schematic with the BomDoc.