MakeLib_Cmd-BuildPCBLibraryBuildPCBLibrary_AD

Created: Juli 27, 2015 | Updated: März 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

Now reading version 1.0. For the latest, read: MakeLib_Cmd-BuildPCBLibrary((BuildPCBLibrary))_AD for version 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: MakeLib Commands

The following pre-packaged resource, derived from this base command, is available:

Make PCB Library

Applied Parameters: AddLibraryToProject=True

Summary

This command is used to create a PCB library of all the 2D/3D Component models that have been placed in the active PCB document. This is very useful if you want to create an exact working library, or archive, of your finished design.

Access

This command is accessed from the PCB Editor by choosing the Design » Make PCB Library command, from the main menus.

Use

After launching the command, a library document (<PCBDocumentName>.PcbLib) will be automatically created and added to the project. The document will open as the active document in the PCB Library Editor. Each unique component (2D/3D Component model) detected on the PCB will then be added to the library.

Tips

The created file is stored in the same location as the PCB document from which it was created.
The created file will appear in the Projects panel as part of the project, under the Libraries\PCB Library Documents sub-folder.

Druckversion

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

MakeLib_Cmd-BuildPCBLibraryBuildPCBLibrary_AD

Nexus message

Summary

Access

Use

Tips

Was this page helpful?