LayerStackManager_Cmd-OpenPcbLayerStackOpenPcbLayerStack_AD

Created: Dezember 04, 2018 | Updated: März 06, 2024 | Applies to versions: 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

Now reading version 3.2. For the latest, read: LayerStackManager_Cmd-OpenPcbLayerStack((OpenPcbLayerStack))_AD for version 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: LayerStackManager Commands

The following pre-packaged resource, derived from this base command, is available:

Access Layer Stack Manager

Applied Parameters: Tab = LayerStack|ShowInBoardPlanner=1

Summary

This command is used to access the Layer Stack, which allows you to configure the layers of the board.

Access

This command is accessed in the following ways:

From the PCB Editor, choose Design » Layer Stack Manager from the main menus.
From the PCBLIB Editor, choose Tools » Layer Stack Manager from the main menus.

Use

After launching the command, the Layer Stack will open in a new tab (Stackup). The Layer Stack can be left open while you work on the board, which allows you to switch back and forth between the board and the Layer Stack. You must perform a Save action in the Layer Stack before edits are reflected in the PCB.

Tips

All of the standard View behaviors, such as splitting the screen or opening on a separate monitor, are supported.

Druckversion

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

LayerStackManager_Cmd-OpenPcbLayerStackOpenPcbLayerStack_AD

Nexus message

Summary

Access

Tips

Was this page helpful?