Defining CAM Editor Film Box Preferences for Altium NEXUS

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Accessing, Defining & Managing System Preferences

The CAM Editor - Film Box page of the Preferences dialog.

Summary

The CAM Editor – Drawing Modes page of the Preferences dialog provides numerous controls relating to the general settings of the CAM Editor within the CAM design space.

Access

This page is part of the main Preferences dialog that is accessed by clicking the  control in the upper-right corner of the workspace then selecting the Film Box entry under the CAM Editor folder.

Options/Controls

Box Name

  • Box Name - use this drop-down to select one of the following values from the box name. This field must contain a valid name, for example: "box1".

Box Size (Inch)

  • X - enter the desired X-axis box size in inches.
  • Y - enter the desired Y-axis box size in inches.

Lower Left Corner (Inch)

  • X - enter the desired X-axis lower-left corner size in inches.
  • Y - enter the desired Y-axis lower-left corner size in inches.

Display

  • Display Box At Start Up - enable this option if you want the film box to appear when the CAM Editor starts up.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.