Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 3.0
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((G to L))_AD

ActiveBOM_Dlg-LineNumberOptionsDialogLine Number Options_AD

Created: Mai 29, 2019 | Updated: Juni 26, 2019 | Applies to versions: 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

The Line Number Options dialogThe Line Number Options dialog

Summary

The Line Number Options dialog is used to configure the numbering start value and increment.

Access

In an ActiveBOM, click the drop-down to the right of the Set Line Number button ( Set Line number button) then select the Line # options command.

Options/Controls

  • Start number - the value to use if the first Line # cell is empty.
  • Increment - increment each blank Line # field by this amount.
Click the main region of the Set Line Number button Set Line Number button to number the lines per the settings defined in the dialog.
The values entered in the dialog are retained for subsequent uses of the Line # command.

Tip

  • If all of the line numbers have already been defined and the Line # command is run again, the Line numbering dialog will open. 
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content