Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 3.1
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((A to F))_AD

ActiveBOM_Dlg-ComponentGroupingDialogComponent Grouping_AD

Created: September 04, 2017 | Updated: März 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2 and 4

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Summary

In ActiveBOM, when the design includes unmanaged components, these components are deemed to be the same when the parameters enabled in the Component Grouping dialog have the same values. The components are grouped when the BomDoc is set to either the Base or the Consolidated view mode. The values shown above are the defaults, these can not be changed.

  • Managed components are always grouped by ItemID.
  • To change the grouping for a custom BOM, use the Group by button in the BomDoc, or the use the Column grouping feature in the Report Manager.
  • Click here for more information about ActiveBOM.

Access

To open the dialog, click   associated to Component Grouping in the BOM Items region of the ActiveBOM Properties panel.

Options/Controls

  • Parameter Name - column of currently available parameters that can be used for grouping.
  • Check - this column displays a checkbox for each available parameter. Only the checked parameters are used to group components.
  • Defaults - click this button to restore the dialog to installation defaults.
  • Add - click to add an additional parameter. After clicking the button, the text Select parameter will appear in the list. Double-click on the text to display a list of all parameters detected across all current BOM Items then select the required parameter from the list.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.