Parent page: Schematic Commands
The following pre-packaged resources, derived from this base command, are available:
Flip Selected Sheet Symbols Along X-axis
Applied Parameters: Axis=X|ObjectKind=SheetSymbol
Summary
This command is used to flip one or more selected sheet symbols along the X-axis.
Access
With the required sheet symbol(s) selected in the main design workspace, this command is accessed from the Schematic Editor by choosing the Edit » Move » Flip Selected Sheet Symbols Along X command, from the main menus.
Use
First, ensure that the required sheet symbol(s) to be flipped are selected in the main design workspace.
After launching the command, what happens next is determined by the number of sheet symbols selected:
- Single Sheet Symbol - the sheet entries associated with the symbol will be swapped to the opposite side of the symbol (in the horizontal plane) - those on the left will be repositioned on the right and vice-versa.
- Multiple Sheet Symbols - the symbols will be flipped about an imaginary vertical line which is located mid-way between the bounding extents of the symbols in the selection. The sheet entries associated with each symbol will be swapped to the opposite side of the symbol (in the horizontal plane) - those on the left will be repositioned on the right and vice-versa.
The I/O Type of sheet entries is not altered.
Tips
- If a sheet symbol is locked, you will be prompted with a confirmation dialog alerting you to this, and asking if you want to continue. However, if a sheet entry is locked, it will still be flipped to the opposite side of its parent sheet symbol (i.e. the lock is ignored).