PCB_Dlg-LayerFormEdit Layer_AD
Created: Juli 28, 2015 | Updated: Oktober 11, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1 and 18.0
Now reading version 18.0. For the latest, read: PCB_Dlg-LayerForm((Edit Layer))_AD for version 22
The Edit Layer dialog
Summary
This dialog allows you to edit the layer name and copper thickness.
Access
In the PCB editor, double-click on a Layer tab at the bottom of the workspace.
Options/Controls
- Name - Create or edit the layer's name in this field.
- Copper thickness - Enter copper thickness for the layer in this field. Use the Ctrl+Q hotkey to switch between unit measurements (
mm
ormil
).
When an internal plane is selected, the dialog will appear as below:
- Name - Create or edit the internal plane's name in this field.
- Copper thickness - Enter copper thickness for the internal plane in this field. Use the Ctrl+Q hotkey to switch between unit measurements (
mm
ormil
). - Net name - Choose a net from drop-down list to assign to the internal plane.
- Pullback - Enter the pullback value for the internal plane.