Altium Designer Documentation
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
PCB_Dlg-ChangeDifferentialPairDifferential Pair_AD
Created: Juli 28, 2015 | Updated: April 13, 2018
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
Now reading version 17.1. For the latest, read: PCB_Dlg-ChangeDifferentialPair((Differential Pair))_AD for version 21
The Differential Pair dialog.
Summary
The Differential Pair dialog allows designers to define differential pairs for PCB tracks.
Access
In the PCB panel, select the Differential Pairs Editor mode. Double-click on an existing differential pair or click Add or Edit to access the dialog.
Options/Controls
- Positive Net - Shows the positive (+) net in the current differential pair. Differential pairs use a naming convention that requires the relevant nets to use a common prefix, followed by a consistent positive/negative suffix, e.g.,
TX0_PandTX0_N. Click the arrow to view and select a net. Click in the field to edit the net name and add your positive suffix. - Negative Net - Shows the negative (-) net in the current differential pair. Differential pairs use a naming convention that requires the relevant nets use a common prefix, followed by a consistent positive/negative suffix, e.g.,
TX0_PandTX0_N. Click the arrow to view and select a net. Click in the field to edit the net name and add your negative suffix. - Name - Shows the current name for this differential pair. Edit this field to create or modify the name.