Testpoint Clearance Check (New Feature Summary)
This document is no longer available beyond version 15.1. Information can now be found here: Fabrication and Assembly Testpoint Style Rule for version 24
The ability to configure any pad or via to function as a testpoint is a valuable feature used during bare-board fabrication testing, and also during the assembly process. Bare-board flying-probe testing allows the fabricator to quickly test between each testpoint and every solder-exposed thru-hole pad and via on the board - delivering an extremely comprehensive test of positive net connectivity, and shorts.
A challenge with bare-board flying-probe testing has been the need to ensure that each testpoint maintains a minimum center-to-center clearance from adjacent pads and vias - otherwise the size of the flying-probe heads can prevent the testpoint and the neighboring pad/via from being simultaneously contacted.
Configuring the Testpoint to Pad/Via Hole Center Distance
The minimum allowable distance from the center of a testpoint to the center of an adjacent pad/via is defined in the Fabrication Testpoint Style or the Assembly Testpoint Style design rules in the PCB Rules and Constraint Editor dialog, as shown below.
Specify the minimim clearance allowed between the center of the testpoint and the center of adjacent pads or vias.