MultiBoardAssembly_Cmd-ZoomZoom_AD

Created: Mai 23, 2019 | Updated: Mai 23, 2019 | Applies to version: 18.1

This document is no longer available beyond version 18.1. Information can now be found here: Viewing the Assembly Shortcuts for version 25

Parent page: MultiBoardAssembly Commands

The following pre-packaged resources, derived from this base command, are available:

Fit All Objects

Applied Parameters: Action=Scene

Summary

This command is used to display all parts in the active Multi-board Assembly document (*.MbaDoc), within the main design window.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor by:

Choosing the View » Fit All Objects command from the main menus.
Using the Ctrl+PgDn keyboard shortcut.

Use

After launching the command, the view in the main design window will change to present all parts in the assembly, centered within the workspace.

Fit Selection

Applied Parameters: Action=Selection

Summary

This command is used to display all currently selected parts in the active Multi-board Assembly document (*.MbaDoc), within the main design window.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

With at least one part (assembly, board, or body) selected in the workspace, this command can be accessed from the Multi-board Assembly Editor by:

Choosing the View » Fit Selection command from the main menus.
Using the Shift+Ctrl+PgDn keyboard shortcut.

Use

After launching the command, the view in the main design window will change to present all selected parts in the assembly, zoomed and centered (where possible) within the workspace.

Druckversion

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

MultiBoardAssembly_Cmd-ZoomZoom_AD

Summary

Access

Use

Summary

Access

Use

Was this page helpful?