Parent page: Client Commands
The following pre-packaged resource, derived from this base command, is available:
Switch Focus between Document and Panel
Applied Parameters: None
Summary
This command is used to toggle the focus between the last active panel, and the currently active design document in the main design window.
Access
This command is accessed from any editor, by using the Shift+F5 keyboard shortcut.
Use
After launching the command, focus will switch to either the active document in the main design window, or the last active panel, depending on which currently holds the focus.
Tips
- The command can be used with docked and floating panels, but not for panels that have been put into pop-out mode.