Applied Parameters: CommandMode=NC
Summary
This command is used to add a drill point to the plunge point of a selected rout path in the current document.
Access
This command is accessed from the CAMtastic Editor by choosing the Place » Drill » Add Drill to Rout Plunge Point command from the main menus.
Use
After launching the command, the cursor will change to a small square and you will be prompted to select mill/rout objects that you wish to add a drill point to. Simply position the cursor over each rout path in turn, and click. Once all rout paths have been selected as required, right-click. A drill point will be added to the plunge point of each rout path.
Tips
- The drill point will use the same drill tool that was used to define the rout path in each case.