Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 3.1
543.23.13.02.12.01.11.0
Close
搜索 Search on Documentation
Documentation Altium NEXUS 文档 ... 对话框参考 Dialogs((M to R))_AD

WorkspaceManager_Dlg-WMPCBVideoPropertiesFormPCB 3D Video_AD

Created: 六月 14, 2021 | Updated: 六月 15, 2021 | Applies to versions: 3.0, 3.1, 3.2 and 4
您正在阅读的是 3.1. 版本。关于最新版本，请前往 WorkspaceManager_Dlg-WMPCBVideoPropertiesForm((PCB 3D Video))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The PCB 3D Video dialog
The PCB 3D Video dialog

Summary

The PCB 3D Video dialog allows you to choose the PCB 3D video to be rendered, which allows information from the data source to produce and display an image.

Access

The dialog can be accessed in the following ways:

  • From the Project Options - Default Prints dialog with PCB 3D Video selected under Documentation Outputs, click Configure. 

  • From the Documentation Outputs region of the Output Job file by right-clicking on the PCB 3D Video output then select Configure from the context menu. 
For more information about adding and defining an Output job, see the Preparing Multiple Outputs in an OutputJob page.  

Options/Controls

  • 3D Video Render Options - use   to toggle the display of a shadow effect for the board.
Note that the View Options tab of the View Configuration panel in 3D mode also provides options to control the presentation of the board. 
  • Selected 3D Video to Render - use the drop-down to select a 3D video to render (i.e. generate a full-motion video playback). 
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content