Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 2.1
543.23.13.02.12.01.1
Close
搜索 Search on Documentation
Documentation Altium NEXUS 文档 ... 对话框参考 Dialogs((A to F))_AD

Workflow_Dlg-CreateProjectCreate Project (Based on Chosen Process) _AD

Created: 六月 07, 2019 | Updated: 六月 07, 2019 | Applies to version: 2.1
您正在阅读的是 2.1. 版本。关于最新版本，请前往 Workflow_Dlg-CreateProject((Create Project (Based on Chosen Process) ))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

This page is applicable for NEXUS only.

The Create New Project dialogThe Create New Project dialog

Summary

This dialog, which actually is titled after the process name, is used to create a new managed project based on a chosen activated project creation process.

Access

The dialog is accessed by clicking File » New » File in <Server> then selecting the desired command from the sub-menu.

Options/Controls

General Tab

  • Project Name - enter a suitable name for the managed project.
The project name must start with and can contain lower or uppercase letters or 0-9. Underscores, dashes, and spaces are allowed but can only be used in the middle of the name (beginning and ending spaces will be ignored). You cannot use the following words: AUX, COM1-COM9, LPT1-LPT9, CON, NUL, or PRN. In addition, the name cannot contain the following characters: \ . / ? % * : | " < >.
  • Description - enter a meaningful description of the project.
  • PCB Project Type - use the drop-down to select a suitable project type.
  • Project Template - use the drop-down to select the desired template from a list of installed templates. Click  to open a version of the Explorer panel (titled Select Project Template) to select the desired template.
  • Start - when clicked, the project will be created in accordance with the underlying workflow process.

Advanced Tab

  • Location - use to specify the location that the project will be located. Click  to browse to and select the desired location.
  • Create Project Folder - check to automatically create a new project folder.
  • Repository - use the drop-down to select the desired repository for the project.
The folder name must start with and can contain lower or uppercase letters or 0-9 and underscores. Dashes, and spaces are allowed but can only be used in the middle of the name (beginning and ending spaces will be ignored). You cannot use the following words: AUX, COM1-COM9, LPT1-LPT9, CON, NUL, or PRN.
  • Server Folder - use to specify the server folder. Click  to open the Choose Folder dialog in which you can choose the desired folder.
The server folder path can start with any symbol except space or slash and can contain any symbol except space at the end. Spaces are allowed in the middle of the server folder name.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.