TextEdit_Cmd-ExtendSelectionColumnToFileBeginExtendSelectionColumnToFileBegin_AD

Created: 七月 27, 2015 | Updated: 三月 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

您正在阅读的是 3.2. 版本。关于最新版本，请前往 TextEdit_Cmd-ExtendSelectionColumnToFileBegin((ExtendSelectionColumnToFileBegin))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: TextEdit Commands

The following pre-packaged resource, derived from this base command, is available:

Extend Selection Column to Beginning of File

Applied Parameters: None

Summary

This command is used to extend a column selection to the beginning of the current document, from the current cursor position.

Access

Access to this command is made using the Alt+Shift+Ctrl+Home keyboard shortcut only.

Use

Simply position the cursor at the required location in the document and launch the command. The column selection will extend to include all columns to the left of the original cursor position and extend upward from the original cursor position to the beginning of the file.

Tips

You can control column selection specifically by using Alt+Click-and-Drag.
Column selection is disabled if word wrapping is enabled.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

TextEdit_Cmd-ExtendSelectionColumnToFileBeginExtendSelectionColumnToFileBegin_AD

Summary

Access

Use

Tips

Was this page helpful?