SystemDesigner_Cmd-RotateSelectionRotateSelection_AD

Created: 九月 18, 2017 | Updated: 三月 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

您正在阅读的是 2.0. 版本。关于最新版本，请前往 SystemDesigner_Cmd-RotateSelection((RotateSelection))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: SystemDesigner Commands

The following pre-packaged resource, derived from this base command, is available:

Rotate Selected Modules Counter-Clockwise

Applied Parameters: None

Summary

This command is used to rotate one or more selected module objects in a counter-clockwise direction.

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.

Access

With at least one module object selected, this command can be accessed from the Multi-board Schematic Editor by:

Choosing the Edit » Move » Rotate Selection command from the main menus.
Using the Spacebar keyboard shortcut.

Use

First, ensure that all modules that you wish to include in the rotation are selected in the main workspace.

After launching the command, the selected modules will be rotated counter-clockwise by 90°.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

SystemDesigner_Cmd-RotateSelectionRotateSelection_AD

Summary

Access

Use

Was this page helpful?