Configuring Schematic Signal Harness Object Properties in Altium NEXUS
Created: 六月 14, 2017 | Updated: 三月 16, 2018
| Applies to versions: 1.0 and 1.1
您正在阅读的是 1.1. 版本。关于最新版本,请前往 Configuring Schematic Signal Harness Object Properties in Altium NEXUS 阅读 4 版本
Parent page: Signal Harness
Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:
- Pre-placement settings – most Signal Harness object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (accessed from the
button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
- Post-placement settings – all Signal Harness object properties are available for editing in the Properties panel when a placed Signal Harness is selected in the workspace.
The Signal Harness default settings in the Preferences dialog and the Signal Harness mode of the Properties panel
Properties
- Width - use the drop-down to select the default width from the available choices: Smallest, Small, Medium, and Large. Click on the color box to access a drop-down from which you can select the default color.
Vertices (Properties panel only)
- Grid - lists all of the vertex points currently defined for the object in terms of:
- Index - the assigned index of the vertex (non-editable).
- X - the X (horizontal) coordinate for the vertex. Click to edit.
- Y - the Y (vertical) coordinate for the vertex. Click to edit.
- Add - click to add a new vertex point. The new vertex will be added below the currently focused vertex entry and will initially have the same X,Y coordinates as the focused entry. Click
to remove the currently selected vertex.