Sch_Cmd-SetupArrayPlacementSetupArrayPlacement_AD

Created: 七月 27, 2015 | Updated: 三月 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2 and 4

您正在阅读的是 3.2. 版本。关于最新版本，请前往 Sch_Cmd-SetupArrayPlacement((SetupArrayPlacement))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Schematic Commands

The following pre-packaged resource, derived from this base command, is available:

Paste Array

Applied Parameters: None

Summary

This command is used to place the current clipboard contents onto the current document, as a vertical or horizontal object array.

Access

This command is accessed from the Schematic Library Editor by choosing the Edit » Paste Array command, from the main menus.

Use

After launching the command, the Setup Paste Array dialog will appear. Set up the various options as required and click OK.

You will be prompted to select a start location on the document, where the array will be inserted. Simply position the cursor at the desired location and click or press Enter. The array will be pasted at the chosen start location.

If the Clipboard Reference option was enabled - on the Schematic - Graphical Editing page of the Preferences dialog - when the Cut or Copy command was used to add the object(s) to the clipboard, the array will be pasted using the reference point designated.

Tips

Enter positive or negative values for spacing, to determine whether the array will be pasted to the right or left respectively for horizontal placement, or upwards or downwards respectively for vertical placement.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Sch_Cmd-SetupArrayPlacementSetupArrayPlacement_AD

Summary

Access

Use

Tips

Was this page helpful?