Sch_Cmd-PreviousComponentLibraryEditorPreviousComponentLibraryEditor_AD

Created: 六月 08, 2017 | Updated: 三月 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2 and 4

您正在阅读的是 4. 版本。关于最新版本，请前往 Sch_Cmd-PreviousComponentLibraryEditor((PreviousComponentLibraryEditor))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Schematic Commands

The following pre-packaged resource, derived from this base command, is available:

Previous Component

Applied Parameters: None

Summary

This command is used to quickly jump to and make active the previous component in the current library document.

Access

This command is accessed from the Schematic Library Editor by right-clicking in the workspace then choosing the Tools » Previous Component command from the context menu.

Use

After launching the command, the previous component in the Design Item ID list in the SCH Library panel will be highlighted and the component will be displayed as the active component in the main design window.

Tips

After reaching the first component in the list, the command will not cycle to the last component again.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Sch_Cmd-PreviousComponentLibraryEditorPreviousComponentLibraryEditor_AD

Summary

Access

Use

Tips

Was this page helpful?