Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 4
43.23.13.02.12.01.11.0
Close
搜索 Search on Documentation

Preparing the PCB for Layout in Altium NEXUS

Created: 四月 25, 2022 | Updated: 四月 25, 2022 | Applies to version: 4

This document is no longer available beyond version 4. Information can now be found using the following links:

Setting up the PCB Environment Considering the Pre-layout Stage of Board Design

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.