Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 1.1
543.23.13.02.12.01.11.0
Close
搜索 Search on Documentation
Documentation Altium NEXUS 文档 ... 对话框参考 Dialogs((G to L))_AD

PcbDrawing_Dlg-TableItemInsertOptionsDialogInsert Table_AD

Created: 五月 24, 2017 | Updated: 二月 06, 2019 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5
您正在阅读的是 1.1. 版本。关于最新版本，请前往 PcbDrawing_Dlg-TableItemInsertOptionsDialog((Insert Table))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Insert Table dialogThe Insert Table dialog

Summary

The Insert Table dialog is used to configure the number of columns and rows in a new table in a Draftsman document.

Access

The dialog is accessed from a Draftsman document in the following ways:

  •  Click Place » Table.
The Place » Table command also is available from the right-click menu of a Draftsman document.
  • Select the table drop-down on the Active bar then select Table.

Options/Controls

  • Number of rows - use the scroll buttons to select the desired number of rows for the table. You also can directly enter the number in the text box.
  • Number of columns - use the scroll buttons to select the desired number of columns for the table. You also can directly enter the number in the text box.
When you click OK, the newly defined table will appear in the workspace ready to be placed.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.